
5 Things to Consider Before Buying a Newmatic Sink & Tap
Choosing a sink is a little like choosing a mattress. You will use it every day for years, you will barely think about it once it is in, and the differences that matter most are hidden underneath. What follows is a straight shopper’s guide to the Newmatic range: what each option is, who it suits and what to check before you buy. First, a few things every model shares, because they sit below the waterline where you will never see them:
In this article
- A bigger drain. Every Newmatic sink has an oversized stainless steel drain, plug and strainer, which helps keep rice grains and peelings from clogging the waste.
- A quieter bowl. Every Newmatic sink is fitted with insulation underneath to soften the drumming of running water and dripping taps, and to reduce moisture damage in the cabinet below.
- An aerator on every tap. Every Newmatic tap has an aerator, which mixes air into the stream so it feels full while using less water. Newmatic says it can save up to 30 per cent.
- A ceramic cartridge. Every Newmatic tap uses an ultra-durable ceramic cartridge. Instead of a rubber washer that slowly wears and starts to drip, two polished ceramic discs slide over each other to open and close the flow.
With more than ten sink and tap models to choose from, the hard part is narrowing down. These five questions, taken in order, will get most people to a shortlist of two or three.
1. Count the bowls you really need
- Single bowls. Best for compact kitchens, or as a second prep sink on an island where you rinse vegetables or fill the kettle. Measure your largest pan first: if it fits, a single bowl is easier to clean and leaves more worktop. Models include the Single 45 and Single HU39G.
- Double bowls. The everyday choice for most medium and large kitchens. One side can hold soaking pans or dirty dishes while the other stays free for rinsing vegetables or glasses. Versions run from 78 to 120 cm wide, so check the inside size of each bowl, not just the overall width.
2. Pick the material you will live with
- Moulded stainless steel. The sensible, budget-friendly choice, in food-grade 304 stainless steel. That grade is often called 18/8, after its roughly 18 per cent chromium and 8 per cent nickel, which is what keeps it from rusting. These sinks are pressed in one piece with no welds, so there are no seams to collect grime, and they take the widest choice of accessories in the range.
- Models include: Single 45, Double 82, Double U86, Double 100, Double 116, and Double 118.
- Quartz. The mid-range option for a kitchen with a bit more personality. Newmatic’s quartz sinks are black and resist scratches and stains. Quartz composite sinks are generally made by binding crushed quartz with resin, which gives a solid, matt surface that feels closer to stone than metal. Dark bowls can show hard-water marks, so wipe them dry.
- Models include: Double 116Q and Double Q116G.
- Handcrafted stainless steel. The most expensive option, but also the most spacious and characterful, made for large kitchens where the sink is a centrepiece. These are welded by hand from 18-gauge, food-grade 304 stainless steel. With sheet steel, the lower the gauge number the thicker the metal; 18 gauge is just under 1.3 mm, a solid thickness for a domestic sink.
- Models include Double HU78, Double H84, Double H100, and Double H120.
3. Decide how it meets the worktop
- Top-mount. The sink drops into a hole in the worktop and rests on its own rim. It is easier to fit, works with more worktop materials and comes in more styles. The trade-off is a rim that takes up a little space and catches crumbs when you wipe down.
- Under-mount. The sink is fixed beneath the worktop, so you can sweep crumbs and water straight into the bowl. It looks cleaner and saves a little space, but needs a solid worktop such as stone and more careful installation. Models include: Double HU78 and Double U86.
4. Choose accessories that earn their place
- Moulded stainless steel sinks. Add a bamboo chopping board, washing tub, basket, tray or soap dispenser. A board that sits across the bowl is the cheapest extra worktop you will ever buy.
- Quartz and handcrafted sinks. Add a roll-up dish drainer or a colander. The roll-up drainer turns the bowl into a drying rack and stores in a drawer when you need the space back.
5. Match the tap to the way you wash
- Cold water taps. The budget option, cold water only. Fine for a kitchenette, a utility area or a home without a hot supply to the kitchen.
- Models include: T03C.
- Mixer taps. The mid-price choice, with hot and cold blended through one spout. This is what most kitchens need. Check that your water supply suits the model before installation.
- Flexi mixer taps. The top of the range: hot and cold, plus a flexible spout you can point into the corners of the bowl or at a stubborn roasting tin. This is also the largest group in the range. Worth it for big families, keen cooks and anyone with a large single bowl.
Run through those five questions and the choice usually makes itself: the number of bowls, the material, the mounting, a couple of accessories and a tap to suit. Please note that Newmatic sinks and taps do not come with free delivery or installation. For details, see our Delivery & Installation page.
Ready to choose? Browse the sinks and taps range.
Bring your kitchen plans to life
Explore the Newmatic range, compare the details that matter to you, and visit a showroom for help planning your kitchen.

